Huawei EchoLife BM635 WiMAX CPE User Manual Download Page 45

Page: 45 / 56

5 Managing the BM635

EchoLife BM635

User Guide

5-4

Huawei Proprietary and Confidential

Issue 01 (2008-06-15)

Step 3

Select the configuration file to be imported.

Step 4

Click

Upload Configuration File

----End

To import the carrier configuration file and the default configuration file, click the

Advanced

tab.

5.4 Rebooting the BM635

After importing a configuration file, restart the BM635.

Step 1

In the navigation tree, choose

Maintain

Device

, and then click the

Reset

tab.

Step 2

Click

Reboot

to restart the BM635.

You can also press the Reset button on the side panel to restart the BM635.

----End

5.5 Upgrading the Software

Do not power off the BM635 when the BM635 is being upgraded to avoid any damage.

The software of the BM635 can be upgraded locally or remotely. It takes about 8 minutes
to upgrade the software of the BM635. After the software is upgraded, the BM635
restarts automatically.

Upgrading the BM635 Locally

To upgrade the software of the BM635, upload the local files for upgrade to the BM635.
Perform the following steps to upgrade the BM635 locally:

Step 1

In the navigation tree, choose

Maintain

Device

, and then click

Firmware

Step 2

Click

Browse

Step 3

Select a file for upgrade.

Step 4

Click

Update Software

----End

Summary of Contents for EchoLife BM635 WiMAX CPE

























































Search results

Summary of Contents for EchoLife BM635 WiMAX CPE

Reviews:

Related manuals for EchoLife BM635 WiMAX CPE

Brands by name

Popular brands

Huawei EchoLife BM635 WiMAX CPE, User Manual

Search results

Summary of Contents for EchoLife BM635 WiMAX CPE

Reviews:

Related manuals for EchoLife BM635 WiMAX CPE

Brands by name

Popular brands