4 Configuring Advanced Functions
EchoLife BM635
User Guide
4-2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Issue 01 (2008-06-15)
4.1 Configuring the WiMAX Network
In a WiMAX network, a subscriber station (SS) or mobile station (MS) can communicate
with the base station (BS) after the WiMAX network parameters are properly set. After
network parameters are properly set, an available connection can be set up between the
BM635 and the WiMAX BS.
4.1.1 Configuring WiMAX Frequencies
Before you configure the network frequency point, you need to configure the network
bandwidth. There are two types of bandwidth such as 5 M and 10 M. You are
recommended to use the default bandwidth.
Step 1
In the navigation tree, choose
WiMAX
>
Scanset
, and then click the
Scanset
tab.
Step 2
Select the bandwidth from the
Working Bandwidth
.
Step 3
Click
Save
.
----End
After the bandwidth set correctly, then set the WiMAX frequency. The following
frequency scanning modes are available:
z
Smart scan mode: According to the specified start frequency, end frequency, and
frequency step, the BM635 determines the range of frequency that can be searched
for and searches for a frequency.
z
Expert scan mode: The BM635 searches for the specified frequency only.
Smart Scan Mode
Parameter
Description
Frequency Step
It indicates the step of frequency scanning in smart scan mode.
Start frequency
It indicates the start frequency to be scanned in smart scan mode.
End frequency
It indicates the end frequency to be scanned in smart scan mode.
Expert Scan Mode
Parameter
Description
DL Frequency
1~10
It indicates the frequency to be scanned in expert scan mode.
You can enter up to 10 frequencies to be scanned.
