background image

 

7

 

Warnings and Precautions 

Please read the safety information carefully to ensure the correct and safe 
use of your wireless device. 

General Recommendations for Use 

Always handle your wireless device with care and keep it in a clean and 
dust-free place. Do not expose your wireless device to open flames or lit 
tobacco products. 

y

 

Always keep your wireless device dry. 

y

 

Do not drop, throw or try to bend your wireless device. 

y

 

Do not paint or scratch your wireless device. 

y

 

Do not attempt to disassemble your wireless device. Doing so will void 
warranty. Only authorized personnel are allowed to do so. 

y

 

Use approved accessories only. Do not connect your wireless device to 
any incompatible products. 

Laws and Regulations 

y

 

Do not operate your wireless device where it may be unsafe to do so or 
where you are required not to do so. 

y

 

To deactivate your wireless device, stop all applications using the wireless 
device first and then remove the wireless device from your PC. 

y

 

Obey all local laws, regulations, rules, orders, signs and notices while 
using the wireless device. Signs about the use of mobile phones should 
also be obeyed as referring to other wireless equipment including wireless 
devices provided by Huawei. 

Electronic Device 

y

 

Deactivate your wireless device near high-precision electronic devices. 
The wireless device may affect the performance of these devices. 

y

 

Pacemaker manufacturers recommend that a minimum separation of 15 
cm be maintained between a wireless device and a pacemaker to avoid 
potential interference with the pacemaker. Deactivate your wireless 
device, if it may have disturbance to the pacemaker. 

Deactivate in Explosive Areas 

Deactivate your wireless device where the air is potentially explosive. It is 
rare, but your PC could generate sparks. 

Deactivate in Blasting Areas 

Deactivate your wireless device where blasting is in progress. 
Remote-controlled radio frequency (RF) devices are often used at 

Summary of Contents for EC228
















Reviews: