22
y
Preamble Type:
It has two options:
Long
and
Short
. In the case that the client
(PC) supports the
Short
type, the WLAN can have a better performance if it is
Short
.
y
MAX Associations Limit:
It refers to the maximum number of connections. It is
used to set the maximum number of concurrent WLAN users on the device.
y
Mode:
It refers to the WLAN accessing mode. The device can work in two modes,
as shown in the following table. The default value is
Access Point
.
Mode
Description
Wireless
Bridge
It is used to connect two or more access points.
Access Point
The access points meeting the IEEE 802.11b/g standard or the
wireless terminals can connect the wireless device.
y
Bridge Restriction:
It refers to the limitation to the peer MAC addresses. When it
is
Disabled
, the device can access all the remote bridges; when it is
Enabled
,
the device can only access the remote bridges that the addresses are in the
address list.
y
Bridges:
It refers to the physical address of the remote peer bridge. The device
supports the point-to-multipoint (PTM) bridge mode.
y
Peer MAC Address:
It refers to the physical address list of the remote peer
bridges..
y
Link Status:
Up
shows the successful connection and
Down
shows the failed
connection.
