Huawei CX600-16, Hardware Description

Page: 117 / 132

Figure 4-20 Appearance of the SFU
Panel
Figure 4-21 shows the appearance of the panel.
Figure 4-21 Appearance of the panel
1. Ejector lever 2. ACT indicator 3. OFL button 4. RUN indicator
5. OFL indicator
Table 4-15 describes the buttons and indicators on the panel of the SFU.
Table 4-15 Buttons and indicators on the panel of the SFU
LED Description
RUN Before the registration of the SFU: If the green indicator blinks twice each
second (2 Hz), the system is in the alarm state.
After the registration of the SFU: If the green indicator blinks once every two
seconds (0.5 Hz), the system is running normally.
ACT If the green indicator is on, it indicates that the SFU is working normally; if the
green indicator is off, it indicates that the SFU is faulty.
OFFLINE When the SFU is working normally, the OFL indicator is off. After the OFL
button is pressed to power off the SFU, the OFL indicator is on.
NOTE
The CX6DSFUI401C can be used only on the CX600-X8.
The 40G switch fabric unit cannot be used together with 200G switch fabric unit for long-term working, and
can be used together only for short-term operation during upgrade.
The 40G switch fabric unit can be used only together with the 40G Switch and Route Processing Unit A4.
HUAWEI CX600-8/16/X3/X8/X16 Metro Service Platform
Hardware Description
4 CX600-X8
Issue 03 (2013-11-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
98