Huawei CP61, Quick Start Manual, Page: 6 / 188

• The wireless charger comes equipped with multiple security protection
features. If you encounter an error during charging, check and fix any
issues that your phone may be experiencing, and then place your
phone back on the wireless charger.
• For best charging performance, it is recommended that you use a
Huawei-approved charger.
• If the phone is not correctly placed, it may not charge properly.
• Do not place any object between the phone and the charger. A
magnetic support, protective case, metallic item, or an object containing
an NFC or RFID chip such as a room card, bus card, bank card, or
passport between the phone and the charger may cause the phone not
to be properly charged, induce additional heat, or damage the object.
Before charging, take out the object, if any, to ensure that it is not
placed between the phone and the charger.
• To keep the wireless charger in good condition, avoid using it inside a
vehicle.
• Do not fidget with the rubber strips to prevent them from falling off, thus
affecting the charging efficiency.
Indicator Descriptions
Safety Information
Before you use the device, read the following precautions carefully.
• In clinics and hospitals where the use of wireless devices is prohibited,
comply with the regulations and power off your device.
Status Description
The indicator is off.
The wireless charger is not connected to a power
supply or the phone has been removed from the
wireless charger.
The indicator blinks white
once. The wireless charger is connected to a power
supply.
The indicator stays
steady white.
The phone is being charged or is fully charged.
The indicator blinks white
quickly.
An error has occurred.
2