Huawei BSS7.0 RRU3606 Product Description Download Page 50

Page: 50 / 54

RRU3606 CDMA Base Station Product Description

Commercial in Confidence

Page 44 of 43

Chapter 8 Installation

This chapter describes the installation of the RRU3606 from the following aspects:

System Installation

System Expansion and Upgrade

8.1 System Installation

The RRU3606 equipment is factory assembled and pre-commissioned based on site

specific conditions. On site, engineers only need to install the cabinet, external cables,

and sunshade according to the instructions in the user guide manual.

The ports for external cables, such as power cables, transmission cables, and signal

cables, are located at the side and bottom of the cabinet and are silk-screen printed.

Before delivery, the RRU3606 is installed with necessary software and is configured

with typical scripts. After the hardware is installed and tested, the system is ready to

operate upon power-on.

All these efforts save installation time on site, enabling operators to build networks and

to deliver services relatively quickly.

8.2 System Expansion and Upgrade

The RRU3606 offers a powerful software upgrade tool. This tool collects upgrade

information and gives related upgrade messages automatically.

Summary of Contents for BSS7.0 RRU3606























































Search results

Summary of Contents for BSS7.0 RRU3606

Reviews:

Related manuals for BSS7.0 RRU3606

Brands by name

Popular brands

Huawei BSS7.0 RRU3606, Product Description

Search results

Summary of Contents for BSS7.0 RRU3606

Reviews:

Related manuals for BSS7.0 RRU3606

Brands by name

Popular brands