Huawei B882-66, Quick Start Quide

Page: 4 / 20

4
Wireless
connection
indicator

Steady on: connected to a LTE/3G network.
 Blinking: connecting to a LTE/3G network.
/ /
LAN indicator

Steady on: LAN port is connected to a client.

Blinking: data is being transmitted through LAN
port.
 Off: no client is connected to LAN port.
Wired
connection
indicator

Steady on: connected to an Ethernet network.

Blinking: connecting to an Ethernet network.
USIM card slot
Install a USIM card to access to the Internet via a
LTE/3G data connection.
Dial-up button
The B882-66 can access the Internet in Auto, Manual,
or On Demand mode.
In Manual mode, press it to manually connect to or
disconnect from the Internet.
Wi-Fi/WPS
button

Press and hold for about 3 seconds to turn on or off
Wi-Fi.

Press and hold for 6 or more seconds to active
WPS connection when Wi-Fi is turned on.
Reset button
Restoring the default settings of the B882-66 will
erase all previous sett ings.
When the B882-66 is powered on, use a sharply
pointed object to press and hold for about 3 seconds
until all indicators are blinking to restore the B882-66
to its factory settings. After the factory defaults are
restored, the B882-66 will restart automatically.
WAN port
Connect to an Ethernet port on the wall through a
network cable if you want to access to the Internet via
wired way.
/ /
LAN port
Connect to computer, switch, or other LAN device.