12
Setting up a Wi-Fi connection through WPS
If the client supports WPS, you can set up a WPS connect ion as follows:
1.
Ensure that Wi-Fi is enabled on the client.
2.
Press and hold the
button for 6 or more seconds. The
indicator
then starts blinking.
3.
Activate the WPS connection on the client in 2 minutes.
4
Configuring your B882-66
1.
After a client is connected to the B882-66 through Wi-Fi or LAN port, launch a
browser on the client and visit
http://192.168.1.1
.
2.
Enter the password (
admin
by default) to log in to the web management page.
3.
Follow the quick setup wizard to quickly configure basic parameters, such as
connection channel, SSID and Wi-Fi key. For details, see the help information on the
web management page.
After finishing the configuration, you can then access the Internet.
For instructions about how to enable a WPS connection on the client, see the client's
user guide.
For security reasons, only one user can log in to the web management page at a time.
To protect your account, change the password after your first login. For details, see
the help information on the web management page.
If you modify the SSID and Wi-Fi key, you must set up the Wi-Fi connection on the
client again.
Summary of Contents for B882-66
Page 1: ...B882 66 LTE Wireless Gateway Quick Start ...
Page 2: ...96722859_01 ...
