background image

 

Copyright © Huawei Technologies Co., Ltd. 2015. All rights reserved. 

No part of this manual may be reproduced or transmitted in any form or by any means without prior written 
consent of Huawei Technologies Co., Ltd. and its affiliates ("Huawei"). 
The  product  described  in  this  manual  may  include  copyrighted  software  of  Huawei  and  possible  licensors. 
Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, 
reverse  engineer, lease,  assign,  or  sublicense  the  said  software,  unless  such  restrictions  are  prohibited  by 
applicable laws or such actions are approved by respective copyright holders. 

Trademarks and Permissions 

, and 

  are trademarks or registered trademarks of Huawei Technologies Co., Ltd. 

LTE is a trade mark of ETSI. 
Other trademarks, product, service and company names mentioned may be the property of their respective 
owners. 

Notice 

Some features of the product and its accessories described herein rely on the software installed, capacities 
and  settings  of  local  network,  and  therefore  may  not  be  activated  or  may  be  limited  by  local  network 
operators or network service providers. 
Thus, the descriptions herein may not exactly match the product or its accessories which you purchase. 
Huawei  reserves  the  right  to  change  or  modify  any  information  or  specifications  contained  in  this  manual 
without prior notice and without any liability. 

DISCLAIMER 

ALL CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE 
LAWS,  NO  WARRANTIES  OF  ANY  KIND,  EITHER  EXPRESS  OR  IMPLIED,  INCLUDING  BUT  NOT 
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE,  ARE  MADE  IN  RELATION  TO  THE  ACCURACY,  RELIABILITY  OR  CONTENTS  OF  THIS 
MANUAL. 
TO  THE  MAXIMUM  EXTENT  PERMITTED  BY  APPLICABLE  LAW,  IN  NO  EVENT  SHALL  HUAWEI  BE 
LIABLE  FOR ANY SPECIAL,  INCIDENTAL, INDIRECT,  OR  CONSEQUENTIAL  DAMAGES, OR  LOSS OF 
PROFITS,  BUSINESS,  REVENUE,  DATA,  GOODWILL  SAVINGS  OR  ANTICIPATED  SAVINGS 
REGARDLESS OF WHETHER SUCH LOSSES ARE FORSEEABLE OR NOT. 
THE  MAXIMUM  LIABILITY  (THIS  LIMITATION  SHALL  NOT  APPLY  TO  LIABILITY  FOR  PERSONAL 
INJURY  TO  THE  EXTENT  APPLICABLE  LAW  PROHIBITS  SUCH  A  LIMITATION)  OF  HUAWEI  ARISING 
FROM  THE  USE  OF  THE  PRODUCT  DESCRIBED  IN  THIS  MANUAL  SHALL  BE  LIMITED  TO  THE 
AMOUNT PAID BY CUSTOMERS FOR THE PURCHASE OF THIS PRODUCT. 

Import and Export Regulations 

Customers  shall  comply  with  all  applicable  export  or  import  laws  and  regulations  and  be  responsible  to 
obtain  all  necessary  governmental  permits  and  licenses  in  order  to  export,  re-export  or  import  the  product 
mentioned in this manual including the software and technical data therein. 

Privacy Policy 

To  better  understand  how  we  protect  your  personal  information,  please  see  the  privacy  policy  at 

http://consumer.huawei.com/privacy-policy

.

Summary of Contents for Atool























Reviews: