HUAWEI Module Atool User Guide
Console Commands and Parameters
Issue 02 (2015-01-31)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
17
This command can be executed only in the LTE/UMTS/TD-SCDMA module.
5.10 bodysar
Command
syntax:
atool bodysar
Command
function:
Tests and displays the bodysar status of the module as well as the
bodysar settings of each communications standard supported by
the module.
Parameter
description:
No parameter.
Example:
5.11 gps
Command
syntax:
atool gps [-t CN0 target]
Command
function:
Tests whether the GPS antenna is properly installed based on the
highest carrier-to-noise ratio (CNR), namely, CN0.
Parameter
description:
-t
: This parameter sets the CNR threshold, which must be a positive
integer. If this parameter is set, the Atool compares the obtained
CNR with the specified CNR. If the obtained CNR is lower than the
specified CNR, an error is reported.
