10
Connect all cables of the router.
2
Connect cables in the sequence from bottom to top and from right to left. Otherwise, some cables
cannot be connected properly.
If a waterproof cover needs to be installed, ensure that the ground cable is routed downwards.
The 04152259, 04152260, and 04152261 cables need to be wrapped by waterproof tapes to prevent
the power-off caused by water.
Connect the positioning pins on the cable tray to the bottom of the router, and then use the
Phillips screwdriver to tighten the two M4x8 screws to install the cable tray on the router.
3
NOTE
Waterproof tape
Determine the positions of the mounting holes on the paperboard based on the distance
between each two of the four self-clinching nuts on the mounting bracket.
1
