14
Securing the Cabinet onto the Base
c
The IBBS200D battery cabinet is considered as an example in the installation. When installing the APM30H,
TMC11H, or IBBS200T cabinet, use the same method.
Waterproof rubber pad
Gasket with an oblong hole
Gasket with an
oblong hole
M12x30 (x4)
Stacking the Two Cabinets (Optional)
d
Remove the four plastic screws
from the top of the lower cabinet.
M12x30 bolt (x4)
Remove the two cover plates
from the top of the lower cabinet.
Remove the four rubber
caps from the bottom of
the upper cabinet.
Stack the cabinets, and then
secure the cabinets with the
four bolts.
Rubber cap (x4)
To ensure the waterproof
performance of the cabinet,
retain the cover plates
properly for the round hole
of the cabinet.
Cover plate
Gasket with an oblong hole
Gasket with an
oblong hole
NOTE
CAUTION
