Context
shows the components of a JG terminal and a power cable.
Figure 5-6
Components of a JG terminal and a power cable
A. JG terminal B. Heat-shrinkable tube C. Insulation layer of a power cable D. Conductor of a power cable
Procedure
Step 1
Based on the cross-sectional area of the cable conductor, strip a part of the cable. The L-long
conductor is exposed, as shown in
. The recommended values of L are listed in
NOTICE
l
When you strip a power cable, do not damage the conductor of the cable.
l
If the bare crimping terminal is not provided by Huawei, you can adjust the value of L as
required.
Figure 5-7
Stripping a power cable (JG terminal)
Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide
5 Appendix
Issue 11 (2015-05-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
43