Aolynk WDR814(I)g ADSL2+ Wireless Router User Manual
3 Internet Access
33
without efforts by the IP address you exposed on the internet.
Dynamic Routing enables the Router to automatically adjust to physical changes in
the network
’
s layout and exchange routing tables with other routers. The Router
determines the network packets
’
route based on the number of hops between the
source and destination.
To set up a static route between the Router and another network, select a number
from the
Static Routing
drop-down list. (A static route is a pre-determined pathway that
network information must travel to reach a specific host or network.) Enter the
following data:
n
Destination IP Address
––
The Destination IP Address is the address of the
network or host to which you want to assign a static route.
n
Subnet Mask
––
The Subnet Mask determines which portion of an IP address is
the network portion, and which portion is the host portion.
n
Gateway
––
This is the IP address of the gateway device that allows for contact
between the Router and the network or host.
n
Hop Count
––
This is the rip protocol implementation parameter.
Depending on where the Destination IP Address is located, select
LAN & Wireless
or
WAN
from the
Interface
drop-down menu.
