User Manual
Aolynk VDR824 ADSL2+ VoIP Broadband Router/
Aolynk VDR824g ADSL2+ VoIP Wireless Broadband Router
4 Web-based Basic Configuration
19
Figure 4-7
PPPoA
Table 4-3
Description of PPPoA items
Item
Description
Description
Type in the distinctive description on this service.
VPI
Type in the VPI value provided by your ISP.
VCI
Type in the VCI value provided by your ISP.
User nameUser
name
Type in the user name provided by your ISP.
Password
Type in the password provided by your ISP.
Auto Connect
o a LAN
If this check box is selected, the device automatically
performs the dialup connection again in response t
access request when the network is disconnected.
User Idle Timeout
to 0, it
Type in the auto-disconnect idle time. Network connection is
disconnected automatically in the case of no data
transmission within the set time. This is suitable for
time-based network accounting. If the time is set
indicates that the connection is never disconnected.
Enable NAT on this
interface
multiple hosts access network via a public IP
address.
Select this check box to enable NAT. With it, SOHO users
can make
Click <Configure> after the configuration is complete.
4) PPPoE
To create a PPPoA WAN connection, select the
PPPoA
option from the ATM mode list
(see Figure 4-4), and then click <Configure> to enter the page as below.
