background image

- 10 - 

4.   If the earth leakage circuit breaker is opened due to the failure of the 

protected line, the reason shall be found out, and the closing operation 

can only be carried out after troubleshooting. 

5.   Various characteristics of the earth leakage circuit breaker and its 

accessories are set by our company according to the order requirements, 

and cannot be adjusted freely during use. 

6. 

As required by the user, the rated residual operating current IΔn and 

earth leakage operating time shall  be set (HYM1L non-delay  earth 

leakage operating time is not adjustable, while HYM1LY earth leakage 

operating time is adjustable). 

7.   According to Chapter II "Normal Working Conditions" of this instruction 

and the above articles of this chapter, the circuit breaker can be closed 

and put into operation. During the operation of the circuit breaker, the 

testing device shall be operated at least once a month to confirm that 

the earth leakage protection function of the circuit breaker is normal. 

VIII. Attention 

1.   The earth leakage circuit breaker cannot protect human body from 

electric shock caused by contact with two load lines at the same time, 

and therefore users shall pay attention to the electricity safety. 

2.   Do not test the device by means of short circuit between phase wires 

and the ground, so as not to affect the service life of the device. 

IX.   Ordering Information 

When ordering, users must indicate: 

1.   Name and model of the earth leakage circuit breaker 

2.   Rated current (A) 

3.   Rated residual operating current (mA) 

4.   Quantity 

5.   Special specifications will be discussed separately 

Example of ordering: Product model name: HYM1L-125L/4300A earth 

leakage circuit breaker, with rated current of 125 A, rated residual operating 

current of 100/300/500 mA, non-delay type, and 100 sets. 

Company Commitment 

On the premise that users abide by the use and storage conditions and that 

the product seals are intact, if the product is damaged or cannot be used 

normally due to manufacturing quality problems within 18 months from the 

production date of the product, our company will be responsible for the 

repairing or replacement free of charge. If the warranty period expires, users 

shall pay for the repair. However, if the damage is caused by the following 

circumstances, the fees for repair still shall  be charged even within the 

warranty period: 

 

Summary of Contents for HYM1L Series













Reviews: