WARNING:
●Avoid potential personal injury or property damage! DO NOT over-tighten the lag
screws [W-A
]. Tighten the lag screws [
W-A
] only until the washers [
W-B
] are pulled firmly
against the wall plate.
●Ensure the arm assembly/wall plate [01] is securely fastened to the
wall before continuing to the next step.
● Any material covering the wall must not exceed 5/8 in. (16 mm)
● Mount
the wall plate
directly onto the concrete surface
● Minimum solid concrete thickness: 203 mm (8 in.)
● Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.)
● Never drill into the mortar between blocks
Wall
Anchor
W-C
Step 3B Solid Concrete or Concrete Block Option
3A-3
3A-4
Drill 3 pilot holes using a 5/32 in.(4 mm)
diameter drill bit. Make sure the depth is
not less than 2 11/64 in.(55mm).
3/8 in.(10 mm)
Socket Wrench
(Not lncluded)
ø5/32 in.(4mm)
2 11/64 in.(55mm)
Install the arm assembly/wall plate
[01] using lag screws [
W-A
] and
washers [
W-B
]. Tighten the lag
screws [
W-A
] only until the washers
[
W-B
] are pulled firmly against the
wall plate.
UP
W-A
W-B
01
11
10
09
08
07
06
05
04
03
02
