HUANUO HNQF2, Manual

Page: 6 / 8

Option B: Grommet Base Assembly
2.Install the Grommet Base Plate(m) to the
Pole(a) with 3 pcs of M5x14 Bolts(f). Tighten
the bolts with the Allen Key(o). See Figure 5.
3.Position the Pole(a) on the mounting surface.
Install the spring washer(l) and M10 washer(k)
to M10 Bolt(i). Insert the bolt(i) into the Support
Plate(j) and the desk hole. Fasten the bolt(i)
with the provided Wrench(p). See Figure 6.