HUANUO HNQF2, Manual

Page: 5 / 8

Option A: Desk Clamp Assembly
Option B: Grommet Base Assembly
1.Install the C-Clamp Brace(c) to the Pole(a)
with 3 pcs of M5x14 Bolts. Tighten the bolts
with the provided Allen Key(o). See Figure 1.
2.Install the C-Clamp(b) to the pole
assembly according to the thickness of the
desktop. The thickness can be changed to 3
positions. Connect C-Clamp(b) and C Clamp
Brace(c) by using 2 pcs of M8x12 bolts(g).
Tighten the bolts with the Allen Key(o) and
tighten the C-Clamp to the desk by
adjusting the plastic knob. See Figure 2.
1.Install the Grommet Base Plate(m) to the
Pole(a) with 3 pcs of M5x14 Bolts(f). Tighten
the bolts with the Allen Key(o). See Figure 2.
2.Position the Pole(a) on the mounting surface.
Install the spring washer(l) and M10 washer(k)
to M10 Bolt(i). Insert the bolt(i) into the Support
Plate(j) and the desk hole. Fasten the bolt(i)
with the provided Wrench(p). See Figure 3.