Supplied Parts
A
X1
B
X1
C
X4
D
X16
Wire Shelf
Wooden Board
Pole
Plastic Clip
Nylon Caster
Wrench x1
Screw nylon casters [E] into the bottom of four poles [C] by wrench.
Snap one pair of plastic clips [D] on the same groove of each pole as
shown in the below image. The arrow of all plastic clips should be point-
ed up, and the grooves of pole should be covered by convex part of
plastic clips.
Grooves of Pole
Convex Part of
Plastic Clips
Step 1
D
C
E
E
X2
X2
