Step 3c
For Concrete Wall Installation Option
[Not Included]
5
Step 3c-1 Position the CPU holder [A]
at your desired height. Level the CPU
holder and mark the four holes.
Step 3c-2 Drill 4 pilot holes using a 1/4
in.(6 mm) diameter drill bit. Make sure the
depth is not less than 1.6 in.(40 mm). Knock
anchors [D] into the wall. Secure the two
screws [C] into the top two anchors [D].
Step 3c-4 Secure the CPU holder [A]
to the concrete wall using the other
two screws [C]
Step 3c-3 Hang the
CPU holder [A] to the
screws [C]
1/4 in.
(ø6 mm)
1.6 in.(40 mm)
Note: Be sure the anchors [D] are
seated flush with the concrete
surface.
[Not Included]
1/8 in.(3 mm)
spacing left
A
