Step 3b
For Wood Stud Installation Option
4
Step 3b-1 Position the CPU
holder [A] at your desired
height. Level the CPU holder
and mark the four holes.
Step 3b-2 Drill 4 pilot holes using a
1/8 in.(3 mm) diameter drill bit. Make sure
the depth is not less than 0.6 in.(15mm).
Secure the two screws [B] into the two top
holes.
Step 3b-4 Secure the CPU
holder [A] using the other
two screws [B]
Step 3b-3 Hang the CPU holder [A]
to the screws [B]
1/8 in.(3 mm)
spacing left
[Not Included]
[Not Included]
A
1/8 in.
(ø3 mm)
0.6 in.(15 mm)
Note: Do not use wall anchor for
wood stud installation
