6.
After rinsing package, firstly, please shut off the heating switch, and let the
conveying motor and fan working for another 20 minutes of so, then shut off the other
power switch, master heating switch and master controlling switch.
7. The diameter of the inputting wire for this machine should be more than 6mm, and
do not put your hand into the machine in case there’s an electric shock.
8. The machine should be put flatly at the ground, or the mesh-belt would be aberrant;
after three months using, please check the aging of the electricity wire, and
exchange it if it’s necessary.
VII. MALFUNCTION & TROUBLESHOOTING:
If there’s a malfunction, firstly please have a check whether the inputting voltage
is normal and also it is in the right wire connection.
1. There’s no heating phenomenon in the shrinking room.
a) The temperature regulator has seized up: maintain or exchange it.
b) AC contactor has been damaged: exchange it.
c) The wire connectors have been aging and lead to turnoff: reconnecting them.
d) The heating tube has been damaged: exchange it.
2. The conveying motor doesn’t work:
a) The motor switch has seized up: exchange it.
b) Speed regulator has been damaged: exchange it.
c) The motor has been burnt due to high temperature: exchange it.
3. Hot wind motor doesn’t work:
a) The fan has been damaged: exchange it.
b) Hot wind switch has been damaged: exchange it.
c) The fan leaf has been blocked: reset the machine after solving this problem.
VIII.
SPARE PARTS OF INNER CLRCULATING SHRIN PACKING
MACHINE
Model
Quantity
BS5530M-PE
BS5540M-PE
Machine body
1set
Truckle
4pieces
Underlay foots
4 pieces
Note: 1. A few mechanisms have slightly different for the above- mentioned models and we
don’t to describe here
2. Customizing models will all used this operation manual, and if there’s any changes for its
