Pressure Adjustment of Printing Wheel and Silicone Wheel:
There is no contact between the characters on the printing wheel and the silicone wheel when it is not
working. Loosen the screw (4) on the front of the silicone wheel and rotate hexagonal nut of the eccentric
wheel (3) so that the character kit in rotation can contact with the silicone wheel(2). If printing a thicker
bag, it needs to be loosen more, and the pressure should not be too high, then tighten the screws when
adjustment is ready. (As shown below).
Temperature Adjustment of Printing wheel and ink wheel:
All the adjustment knob is at “0” position when the machine is shipped from the factory. Users need to
adjust them according to needs. The temperature can be appropriately lower when the ink roller is first
used. After a period of time, the temperature can be appropriately increased to make the deeper ink out
to extend the life. When the ink roller reaches the operating temperature, use a white paper to lightly
touch the outer surface of the ink roller, and it is preferable that the paper be stained with a little ink. And
the set temperature must be moderate.
5
Adjustment Screw
NO.
Name
Remark
1
Printing Wheel
2
Silicone wheel
3
Eccentric Wheel
4
Screw
Model
Outside Diameter
（
mm
）
Height
（
mm
）
22
