Beijing Huahuan Electronics Co., Ltd
4.2.
Installation
4.2.1.
Mounting Procedure
Thoroughly clean the area on window surface to be used.
Gently but firmly press the device onto the cleaned window surface until it is
securely fixed on the glass.
Plan in advance the routing of the cables and the location for the PoE adaptor
and its AC power outlet. Note that long cables should not be allowed to dangle on
their sockets; they should be secured as close as possible to the device to avoid
reliability problems.
GeckoSynco
1PPS+ToD
Ethernet
To PTP Domain
Ethernet
PoE Power
PoE Adaptor
Cable Fix
AC Power Cord
Optical
Ethernet
Figure 4-2 Installation schematic
Figure 4-2 depicts the installation schematic for the GeckoSynco. If the
Ethernet link partner is a PSE that can supply the PoE power directly, the adaptor
in the schematic is not needed. The use of the 1PPS+PoD and/or the optical cable
is optional, depends on the use case, but the PoE Ethernet cable is always needed
20 HX.PTP-GM02 IEEE-1588 Grandmaster Clock V1.0
Summary of Contents for HX.PTP-GM02
Page 1: ...HX PTP GM02 Suction window mount GNSS based Indoor PTP Grandmaster...
Page 8: ......
Page 10: ......
