Huahuan Electronics H20RN-2000.V2 Series Hardware Description Download Page 49

Page: 49 / 52

Hardware Description

H20RN

2000.V2 Series Platforms

4 Appendix1 General Card Introduction

Version 1.3(Oct.2019)

Beijing Huahuan Electronics Co., Ltd.

4.10 FAN Card (FAN02/FAN)

H20RN-2000.V2

Fan card is used to lower the working temperature of power card, so as to extend its working

life. User can monitor the fan running state through NMS, if the fan fault alarm is displayed on

the network management interface, user needs to detect the fan timely and replace the fan.

Figure 4-17

Fan card (FAN02)

FAN02

ESD

E S D

H20RN-2000L.V2

Fan card is used to lower the working temperature of power card, so as to extend its working

life. User can monitor the fan running state through NMS, if the fan fault alarm is displayed on

the network management interface, user needs to detect the fan timely and replace the fan.

Figure 4-18

Fan card (FAN)

FAN

E S D

Summary of Contents for H20RN-2000.V2 Series





















































Search results

Summary of Contents for H20RN-2000.V2 Series

Reviews:

Related manuals for H20RN-2000.V2 Series

Brands by name

Popular brands

Huahuan Electronics H20RN-2000.V2 Series, Hardware Description

Search results

Summary of Contents for H20RN-2000.V2 Series

Reviews:

Related manuals for H20RN-2000.V2 Series

Brands by name

Popular brands