22
| Connection
4. connEcTIon
Connect the device to a suitable power supply (12 V DC/500 mA). Make sure
that the correct polarity of the +12 V DC is connected to the relay output. The
maximum load per relay is 230 VAC/5 A or 24 V DC/10 A. The power
output per relay must not exceed 1000 W while the total power output may
not exceed 3000 V.
External consumers should be directly connected to the relay terminals according
to the printed circuit symbols.
As electrical loads, DC or AC can be connected, make sure that you establish
a secure connection of the cables to the terminals, particularly when connecting
mains voltage. All consumers should be protected by their individual fuse.
Keep the device away from sources of strong radio frequencies or magnetic
fields, as the device may start switching the relays due to the interference.
If the relay is switching a touchable low voltage, then the neighbouring relay
may not be connected to or switch a dangerous voltage. (Voltage over 35 V).
5. guaranTEE/warranTy
This device has a guarantee of two years. The warranty includes the repair of
faults that can be detected due to the use of faulty materials or bad workmanship.
The installer of the device must ensure that all legal and regulatory requirements
for the installation are met. Ignoring the details of this instruction manual will void
the warranty. For consequential or incidental damages in connection with this
product, no liabilities will be taken. We reserve our right to repair, replace or
refund the purchase price in the case of warranty.
The following cases will void the warranty:
– Changing, reworking or repairing the device.
– Changing the functionality or layout of the device.
– Using other components than original parts or components approved by the
manufacturer.
– Damages caused by not following the instructions and wiring diagram.
– Damages caused by overloading the device.
– Damages caused by third parties.
