16
Programming the Conditioner
Press “
MENU
” Key
MENU
SET
and Select “Date and Time” using “
SET
”
MENU
SET
Button and set for setting the regeneration time,
Press “
MENU
” Key
MENU
SET
and Select Main Menu till you hear a beep and select Regen time.
NOTE** All units are factory programmed for the correct size and regeneration cycle alteration should only be done by a factory
trained technician or after consultation with one of our technical representatives if you have any questions please call:
877-288-9888
STARTUP INSTRUCTIONS
(CONTINUED)
4. Manually Regenerate the Valve
(Continued)
5. Add Salt to the Brine
Tank/Cabinet
Put 40 kgs of crystal water softener salt in
the brine tank. The unit will automatically
fill the water to the correct level when it
regenerates.
4a.
Open the inlet on the bypass valve slightly and very slowly allow water to enter the unit. (If the water enters too quickly it will push the media or carbon up into the control
valve and get plugged).
Once the unit has filled sufficiently that water is at least equal to the height of the top of the media shut down the water for 15 – 20 minutes for the carbon to soak. Unplug the
power cable. After the carbon has soaked for the recommended time continue.
4b.
Open the inlet on the bypass valve slowly and allow water to enter the unit. (The outlet of the bypass should remain closed to prevent any fines or debris from entering the
plumbing system. Allow all air to escape from the unit before turning the water on fully then allow water to run to drain for 3-4 minutes, or until the water at the drain
appears to be clear of any fines.
5.
Plug in the valve and the valve will automatically advance to the SERVICE position. Open the outlet valve on the bypass, then slowly open the nearest treated water faucet
and allow the water to run until clear, close the tap and replace the faucet screen.
6
.
The Valve is already programmed by the factory. Please continue with set up of current time and hardness.
NOTE
Brine level will vary as a
result of variable and
precision brining functions.
Date and Time
Hardness
Manual Regen.
Dealer Information
Salt Reminder
Main Menu
= =
Date and Time
= =
17-Feb-2016 12:25pm
Press
To Cancel
Press
To Confirm
Setting Complete
Press
To Return
Auto On
Date and Time
Hardness
Manual Regen.
Dealer Information
Salt Reminder
Main Menu
Setting Complete
Press
To Return
Date and Time
Hardness
Manual Regen.
Dealer Information
Salt Reminder
Main Menu
=
Hardness
=
25 GPG
Press
To Cancel
Press
To Confirm
QUALITY WATER
666 3 AVE
CHIGAGO IL
TEL 12345678
Setting Complete
Press
To Return
Date and Time
Hardness
Manual Regen.
Dealer Information
Salt Reminder
Main Menu
= Main Menu =
Regen. Time Setting
System Capacity
Salt Mode Setting
Advanced Menu
= =
Regen. Time
= =
02:25AM
Press
To Cancel
Press
To Confirm
Setting Complete
Press
To Return
Date and Time
Hardness
Manual Regen.
Dealer Information
Salt Reminder
Main Menu
Setting Complete
Press
To Return
Salt Reminder
ON
OFF
Press
To Cancel
Press
To Confirm
Dealer
information
input letter
by letter
Set up
Regeneration
Time:
Set up Current Time of the
Day and hardness:
Press Set
Key till
you hear
“Beep”
Start up and programming
complete. Unit is now operational.