-2-
-3-
3. Software installation
Scan the following two-dimensional code
to download application software and
install it.
4.2 Software operation
4. Product use
4.1. Equipment connection: insert the infrared thermal imager into
USB interface of the mobile phone and it will identify USB equipment
automatically and pop out the prompt. Click “OK” and the software
will start the mobile phone thermal imager and the mobile phone
screen enters the infrared observation picture.
4.2.1 Gallery, camera and recording
(1). Gallery: Click to check the photos and videos stored in the
mobile phone photo album.
2) Camera: Save the current picture and the photo position is:
Internal memory /DCIM/Htilmage.
3. Recording: Click to begin the recording and click again to end
the recording. The recording position is: Internal memory
/DCIM/Htilmage.
4.2.2 Shutter: click the shutter button to carry out heterogeneity
correction
.
Temperature
measuring analysis
Pallet
Temperature
measuring device
Other setting
Gallery
Recording
Camera
Shutter
