Initial operation
Product boot/shutdown
Press and hold the “ ” button for more than 3 seconds to turn
the Thermal Imaging on or off.
The function to hide highest/lowest temperature column
at the screen bottom
under the operation after normal start up, press “ ” key and
the screen bottom will display highest/lowest temperature column.
Press “ ” can also hide it.
LCD screen display
After turning on the power, open the lens protection cover, as
shown in , the screen shows the thermal imaging status.
Witching between infrared thermal image and visible image
press “ ” or “ ” key to switch the degree of fusion between
inferred thermal images and visible images (the degree of fusion is
0%, 25%, 50%, 75% and 100%).
Note:
Time adjustment may be required when you move the camera
between environments with widely varying ambient temperatures.
Image capture
press the image capture key. When the capture is successful, the
screen will display “store photo?” prompt. If “yes” is selected,
please press “ ” key to determine to save the image. If “no” is
selected, press “ ” key to determine not to save the image.
Image output
The saved images through capture may be checked and output
by connecting with a computer through Micro USB.
Read images
Open the USB protective cover as shown in . Use USB line to
connect the USB port and then computer to read the images or
save it into computers.images or save it into computers.
The supported operating system through verification includes:
winxp, win7, win 8, win10, Apple system.
It is suggested to use the attached USB line or USB line with
higher quality.
Note:
When connecting with a computer, pull off the data line after
selecting “pop out device safely” to avoid causing file system
damage and other problems. If “unable to save” and other
problems occur, you may find the hard disc in the computer and
fix it.
MENU
SELECT
2
3
17
18
