Steady green when power on, blinking green when the call is ringing.Blinking red
When there are new messages.
During the conversation, or plan to dial a call.
The call is ringing.
Idle interface.
Pick up the handset; enter the number, then press the send soft key or press
.
Press
or the line keys; enter the number, then press the send soft key or press
.
Press
, enter the number, then press the send soft key or press
.
Hang up the handset or press the cancel soft key.
Press
, or press the cancel soft key.
Press the cancel soft key.
Pick up the handset.
Press
.
Press
.
Press
to redial the last call that dialed.
Press
or press the hold soft key during a call to hold the call.
Press
or press the resume soft key to resume the call.
1) Press
or transfer soft key during the conversation, the call is on hold now.
2) Enter the number that transfers to.
3) Press
or the B Transfer soft key and now the blind transfer completed.
1) Press
or transfer soft key during the conversation, the call is on hold now.
2) Enter the number that transfer to and press the send soft key or
.
3) Start the second conversation, press
or transfer soft key, then transfer completed.
1) Press
or transfer soft key during the conversation, the call is on hold now.
2) Enter the number transfer to, and then press
, then you can hear the ring tone.
3) Press
or the Tran soft key and now the Semi-attended transfer completed.
Assuming that A and B are in conversation. A wants to bring C (or D & E) in a conference:
1) A press Conference soft key, the call is placed on hold.
2) A enter the number of C and then press send soft key or , C answers the call.
3) A press the conference soft key, then A, B and C are now in a conference.
4) If add D&E, A press Hold soft key, the current conference is on hold, press New Call soft key and
dial D, D answer the call. A Press Hold soft key and New Call soft key and dial E,E answer the call. A
press the conference soft key, then A,B,C,D,E are in conference.
Press
to mute the microphone during the call.
Press
again to un-mute the conversation.
When you want to change from the low angle position to another positions.
Please take out the hook switch then rotate it 180 degrees then slide it back into its groove.
