HTC ROSE110, User Manual, Page: 132 / 232

132 Getting Connected
3 ˁʳ In Select network , choose the WLAN network to connect to.
4. In Network type , select Internet and click Connect .
Notes
•
When you select an open (unsecured) network, you will be automatically
connected to the network after clicking
Connect .
• If you are connecting to a security-enabled network, you will be asked to enter the
WEP Key . Enter the WEP Key and click Done .
You can check the Wi-Fi icon on the Title bar of the screen to see if you are
connected to the Wi-Fi network. To see the status icons, please see “Status
Indicators” in Chapter 1.
Note In Comm Manager, click Settings > WLAN Settings > Connection Status to check
the current connection status and signal quality of each Wi-Fi channel.
To increase security on the Wi-Fi network
The LEAP (Lightweight Extensible Authentication Protocol) feature of Comm
Manager helps increase security on your phone, and ensures that nobody is able to
access your network without your permission.
1. On the WLAN Settings screen, select LEAP .
2. Click Menu > New .
3. Enter the SSID (Service Set Identifier). You can obtain this information from
your wireless service provider.
4. Enter the user name, password, and domain.
5. Select an Authentication Type .
By default, the Authentication Type for your phone is Open System
authentication.
Notes • By default, the LEAP screen displays data that you entered previously. However,
you can modify or delete the data as required by clicking Menu > Modify or Menu
> Delete on the LEAP screen.
• For LEAP to work correctly, the receiving phone (your phone) must be set with the
same SSID, user name, and password as the access point.