background image

Thank You and Congratulations!

 

Thank you for your recent purchase of HTC Outfeed Rollers. This product 

is manufactured by craftsmen dedicated to making high quality, reliable 

products. All HTC products are backed by our Limited Lifetime Warranty* 

and a responsive, dedicated customer service department. We would 

appreciate hearing your comments or suggestions. Please feel free to call 

or write anytime. We welcome correspondence from everyone who has ever 

purchased or used one of our fine products.

A Word About Your New Outfeed Rollers

 

A unique patented HTC exclusive! A work support that’s always in place 

and ready to use. Outfeed Rollers support the workpiece to 4' past the blade. 

That’s a full 48" to help balance a full 8' panel. HTC Outfeed Rollers are 

compatible with most fence systems on the market and have a patented cam 

action adjustment that lowers the Outfeed Rollers 3/8" for proper support 

of sliding cross-cut and miter slot fixtures. Folds down easily for compact 

storage and swings into place without the use of tools. When you work with 

full 4' x 8' panels and extra long boards, HTC Outfeed Rollers let you rip and 

cross-cut easily, accurately... but most importantly safer by yourself.

General Product Safety Warning

 

As with all products there are certain hazards involved with their 

operation and use. Using any product with respect, caution, and common 

sense will considerably lessen the possibility of personal injury. Safety is a 

combination of staying alert, knowing how the product works, and knowing 

how to properly use the product. To use any product safely you should plan 

ahead and practice the proper steps prior to actually using the product. If 

safety rules and instructions are overlooked or ignored, personal injury to 

the operator or other people in the area may result. Safe operation of any 

product requires that you read and understand the product instructions and 

all labels affixed to the product.

Always read and follow all instructions and safety rules carefully.

 

This product is designed for certain uses only. This product or any of its 

parts shall NOT be altered, changed, or modified in any way and/or used 

for any other use than it’s designed for. If you have any questions about its 

proper care or use DO NOT use the product until you have written HTC and 

we have advised you in writing.

HTC Products 

1161 Rankin Dr. 

Troy, MI 48083 

800-624-2027 

www.htcproductsinc.com
8:00 AM to 5:00 PM EST/EDT Monday – Friday 

2

* See back cover for complete Warranty information.

TM

Summary of Contents for Outfeed Rollers HOR-1038U













Reviews: