HTC CM-2007, Manual

Page: 2 / 5

600V 1V
Input impedance: at 400mV range >40M Ω , at other ranges are
10M Ω .
Overload protection: 1000V DC or 750V AC peak value.
3.2.4 AC voltage (ACV)
Range Accuracy Resolution
400mV ±(1.5% 5 ） 0.1mV
4V
±(1.0% 5 ）
1mV
40V 10mV
400V 100mV
600V 1V
Input impedance: at 400mV range >40M Ω , at other ranges are
10M Ω .
Overload protection: 1000V DC or 750V AC peak value.
Frequency response: at 600V range: 40~100Hz,
at other ranges:40~400Hz.
Display: average value response (based on sine wave RMS).
3.2.5 AC current (ACA)
Range Accuracy Resolution
400A <40A: ±(3.0%
5 ）
>40A: ±(2.0%
5
）
100mA
600A 1A
Overload protection: >800A, input time<1 minute.
Frequency response: 40Hz-200Hz.
Display: average value response (based on sine wave RMS).
3.2.6 Resistance
Range Accuracy Resolution
400 Ω ±(0.8% 5 ） 0.1 Ω
4k Ω
±(0.8% 3
）
1 Ω
40k Ω 10 Ω
400k Ω 100 Ω
4M Ω 1k Ω
40M Ω ±(1.2% 5 ） 10k Ω
Overload protection: 250V RMS.
NOTE: DO NOT input any voltage value at this range!
3.2.7 Capacitance test
Range Accuracy Resolution
4nF ±(5.0% 20 ） 1pF
40nF
±(3.5%10
）
10pF
400nF 100pF
4uF 1nF
40uF 10nF
200uF ±(5.0%10 ） 100nF
Overload protection: 250V RMS.
NOTE: DO NOT input any voltage value at this range!
3.2.8 Frequency test
Range Accuracy Resolution
100Hz
±(0.5% 5
）
0.1Hz
1kHz 0.1Hz
10kHz 1Hz
100kHz 10Hz
1MHz 100Hz
10MHz 1kHz
Input sensitivity: >0.7V.
Overload protection: 250V RMS.
3.2.9 Temperature test
Range Accuracy Resolution
（
-40
～
750
）℃
＜ 400 ℃ ± （ 1.0%+5 ）
≥ 400 ℃ ± （ 1.5%+15 ）
1
℃
Sensor: K type banana plug (Ni-Cr-Nickel silicon).
NOTE: DO NOT input any voltage value at this range!
3.2.10 Continuity Test
Range Description Test Conditions
Diode forward
voltage drop
Forward DC
current is approx
0.5mA, reverse
voltage is
approx 1.5V.
When the resistance
under test is less
than 50±10 Ω ,
buzzer sounds
continuously.
Open circuit
voltage: 0.5V
Overload protection: 250V RMS.
Note: DO NOT input any voltage value at this range!
4. OPERATION
4.1 PANEL DESCRIPTION (refer to picture 1)

Jaw: 0 to 600 AC current and NCV detecting
device.

Clamp gunlock: Pressing the gunlock can turn on
or off the clamp.

Hand protection: A safe design to protect users
from touching the dangerous area.

Clamp light: Opening the clamp light can light up
the tested area in the dark to prevent the danger.

NCV indicator: Detect the existence of the high voltage around to