HTC ATHE100, User Manual, Page: 44 / 242

44 Entering and Searching for Information
2.5 Using Block Recognizer
With
Block Recognizer
, you use a single stroke to write letters, numbers,
symbols, and punctuation, which are then converted into typed text.
To use Block Recognizer
1. From a program, tap the
Input Selector
arrow, and tap
Block
Recognizer
.
2. Write characters, numbers, and symbols in the designated writing
area.
•
Enter letters by writing in the
abc
(left) area of the box.
•
Enter numbers by writing in the
123
(right) area of the box.
•
Enter symbols and punctuation by tapping in either area of the
box and then writing the desired character.
Note Block Recognizer
is available when text entry is possible.
Tip For help with writing characters with Block Recognizer , tap the question
mark near the writing area.
2.6 Using Transcriber
Transcriber
is a handwriting recognition program that allows you to write
in cursive, print, or a combination of both. Transcriber works transparently
in the background of programs, recognizing words with its integrated
dictionary. When Transcriber is turned on, it interprets stylus movement
anywhere on the screen as handwriting input. For more information about
using Transcriber, see Help on your device.
To start Transcriber
1. Start a program that accepts user input, such as Word Mobile.
2. Tap the
Input Selector
arrow, and tap
Transcriber
. The Transcriber
introductory screen appears.
To write using Transcriber
1. In a program, position the cursor where you want text to appear.
2. Use the stylus to write anywhere on the screen. The handwriting will
be converted to text shortly after you lift the stylus from the screen.