HTC 80 iD
Usage
1.1
15
4.2.1
The dust extractor's operating position
When the dust extractor is in use, it must be in the operating position, see Figure 4-1,
page
Figure 4-1. Operating position
4.2.2
Lower the dust extractor to the service position
The dust extractor can be lowered to the service position by releasing the upper cylinder
section from the lower cylinder section, see Figure 4-2, page
Start with the dust extractor in the operating position, see Figure 4-1, page
follow the instruction below:
Summary of Contents for 80 iD
