HTC 80 iD, Manual

Page: 14 / 61

Safety HTC 80 iD
6 1.1
Warning!
The dust extractor may only be used and moved on level surfaces. There is a
risk for crush injuries, if it should start to roll.
Warning!
Connect the dust extractor to an earth fault breaker.
2.3 Notes
Note!
The dust extractor is best used together with HTC's grinding machines in
connection with dry grinding of stone and concrete floors, and in accordance
with HTC's recommendations.
Note!
Only use original spare parts from HTC for the dust extractor. Otherwise
neither the CE marking nor the warranty will be valid.
Note!
For the CE marking to be valid, the instructions in this manual must be
followed.
Note!
The dust extractor should be stored in a dry, warm (above zero) location when
not in use.
Note!
If the dust extractor is stored in a cold location (below zero), it must be placed
in a warm location (above zero) for at least two hours before use.