THT32
EN - 2
1 PRECAUTIONS
AND
SAFETY MEASURES
The instrument has been designed in compliance with the directives relevant to electronic
measuring instruments. For your safety and in order to prevent damaging the instrument,
please carefully follow the procedures described in this manual and read all notes
preceded by symbol
with the utmost attention. Before and after carrying out the
measurements, carefully observe the following instructions:
CAUTION
Do not carry out any measurements in case gas, explosive materials or
flammables are present, or in humid or dusty environments.
Do not carry out any measurement in case you find anomalies in the
instrument such as deformation, breaks, substance leaks, absence of
display on the screen, etc.
Keep the instrument steady during any measuring operation.
Do not carry out any measurements which exceed the working and storage
temperature ranges specified in § 7.1.1.
Only the accessories provided together with the instrument will guarantee
safety standards. They must be used only if in good conditions and
replaced with identical models, when necessary.
Check that the battery is correctly inserted.
Check that the LCD display gives indications consistent with the function
selected.
Do not direct the instrument at very high intensity radiation sources (e.g. the
sun) in order to prevent damaging the IR sensor.
Prevent hits or strong vibrations in order to keep the instrument from
damage.
When bringing the instrument from a cold to a hot environment, leave it on
long enough for condensation water to evaporate.
In this manual, and on the instrument, the following symbols are used:
Warning: observe the instructions given in this manual; improper use could
damage the instrument or its components.
Compliant with European Standards
1.1 DURING
USE
CAUTION
Failure to comply with the caution notes and/or instructions may damage
the instrument or be a source of danger for the operator.
Use the instrument only in the temperature ranges indicated in § 7.1.1.
1.2 AFTER
USE
When measurement is complete, switch off the instrument. If the instrument is not to be
used for a long time, remove the battery.
