background image

 

 

HT3302

 

 

 

EN - 16

8. SERVICE 

8.1. WARRANTY 

CONDITIONS 

This instrument is warranted against any material or manufacturing defect, in compliance 
with the general sales conditions. During the warranty period, defective parts may be 
replaced. However, the manufacturer reserves the right to repair or replace the product. 
 
Should the instrument be returned to the After-sales Service or to a Dealer, transport will 
be at the Customer's charge. However, shipment will be agreed in advance. 
Only use original packaging for shipment; any damage due to the use of non-original 
packaging material will be charged to the Customer. 
The manufacturer declines any responsibility for injury to people or damage to property. 
 
The warranty shall not apply in the following cases: 
 

  Repairs that may become necessary as a consequence of an incorrect use of the 

instrument or due to its use together with non-compatible appliances. 

  Repairs that may become necessary as a consequence of improper packaging. 

  Repairs which may become necessary as a consequence of interventions performed 

by unauthorized personnel. 

  Modifications to the instrument performed without the manufacturer's explicit 

authorization. 

  Use not provided for in the instrument's specifications or in the instruction manual. 

 
The content of this manual cannot be reproduced in any form without the manufacturer's 
authorization. 

 
Our products are patented and our trademarks are registered. The manufacturer 
reserves the right to make changes in the specifications and prices if this is due to 
improvements in technology.

 

 

8.2. ASSISTANCE 

If the instrument does not operate properly, before contacting the After-sales Service, 
please check the conditions of the battery and replace it, if necessary. Should the 
instrument still operate improperly, check that the product is operated according to the 
instructions given in this manual. Should the instrument be returned to the After-sales 
Service or to a Dealer, transport will be at the Customer's charge. However, shipment will 
be agreed in advance. 

A report will always be enclosed to a shipment, stating the 

reasons for the product's return. 

Only use original packaging for shipment; any damage 

due to the use of non-original packaging material will be charged to the Customer.

 

 

Summary of Contents for HT3302





















Reviews: