HT64
EN - 12
15. Use the F2 or F3 key to select the options:
Delete all Measurements
all snapshots (measurements) are deleted
Delete all Recordings
all recordings are deleted
Delete all Graphs
all graphs are deleted.
16. Press the F1 (OK) key to carry out the selected operation (a confirmation message is
shown by the instrument).
General settings of the instrument
17. Use the F2 or F3 key to select symbol
“
Setup
”
and press the F1 key (see Fig. 13
–
left
side).
Fig. 13: General settings of the instrument
18. Use the F2 or F3 key to select the options:
Reset
restores the instrument
’
s default conditions.
Format
allows activating the key tone, setting the format of date/time and of the
displayed numbers (decimal comma or point).
General
allows setting the system
’
s date/time, defining the Auto Power OFF
interval, the background colour and the display
’
s font colour and type, and choosing
the system
’
s language.
Meter Info
provides information on the internal Firmware version and on the
memory
’
s available space.
19. Press the F1 (ENTER) key to carry out the selected operation or the F4 (CANCEL) key
to go back to the measuring screen.
General settings of the instrument
–
Reset
Fig. 14: Activating the instrument
’
s reset
20. Press the F1 (OK) key to activate the Reset.
21. The Reset operation do not deletes the instrument
’
s internal memory