3-16
4. Install:
·
air filter element
·
air filter case cover
Note
:
To prevent air leaks make sure that the sealing
surface of the element matches the sealing surface
of the case.
console
·
passenger seat
·
driver seat
CHECKING THE COOLANT LEVEL
1. Place the vehicle on a level surface.
2. Lift the hood up.
3. Check:
·
Start the engine, warm it up for several minutes, and
then turn it off.
·
coolant level
Note
:
Before checking the coolant level, wait a few
minutes until the coolant has settled.
·
coolant level
The coolant level should be between the minimum
level mark
○
A and maximum level mark
○
b .Below the
minimum level mark
→
Add the recommended coolant
to the proper level.
CHANGING THE COOLANT
1. Remove:
·
driver seat
·
passenger seat
·
console
Lift the hood up.
。
·
coolant reservoir cap
①
·
Disconnect coolant reservoir hose
②
·
Adding water instead of coolant lowers the antifreeze
content of the coolant. If water is used instead of
coolant, check and if necessary, correct the antifreeze
concentration of the coolant.
·
Use only distilled water. However, soft water may be