manualshive.com logo in svg

HST HST-HP201-2AB, Product Manual

Share
Download
HST HST-HP201-2AB Product Manual Download Page 29

 

November-2017 

Page 29 

 

After finishing updates of configuration, enable key must be on to save the new values. 

Press ENTER key. If panel is at access level 3, new data will be saved directly. If panel is at 
access level 2, window appears to enter access level 3 password to proceed with saving. 

 

2.

 

Relay configuration 

To select this item use arrow keys to highlight it and press ENTER key or press 2 key 

from numeric keypad. 

This menu is used to configure all panel onboard relays. You can select any relay using 

arrow key and press ENTER key on the highlighted key or press the key number directly 
from numeric keypad. All relays have the same configuration. Only default settings may be 
different for some relays. 

 

X Icon in front of a relay means that this relay is in disabled state. 

After selecting one relay, relay configuration window appears with its last saved 

parameter value. 

First configuration is which events will activate the relay. There are 4 fixed events, 

‘Alarm’, ‘Fault, ‘Supervisory’ and ‘Pre-Alarm’ stated on the left side of the configuration 
window. To make the relay activates or does not activate on one event, highlight it with arrow 
key and press 0 key. If X symbol appears in front of the event, this means that the relay will 
activate on this event.  If X symbol does not appear in front of the event, this means that the 
relay will not activate on this event. For the relays and all outputs, selection of more than one 
event is accepted. 

Summary of Contents for HST-HP201-2AB
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands