HSP MX40P, Fitting Instructions Manual

Page: 5 / 16

Hinge mounts:
Align the hinge mounts along front of tray, ensuring the hinges are properly positioned from centre of tub 3 6 0 mm
to centre of hinge mount either side along the inside of the front of tub. Attach the hinges using self-drilling screws
(supplied) through holes pre-drilled into the hinges. Apply clear or black silicone to any gaps and between the hing-
es and the vehicle to prevent water entry.
Measure and mark the positions as indicated above from the centre of the bed for placement of the bottom hinges.
WARNING: RECHECK DIMENSIONS TO ENSURE CORRECT MEASURENT
Drive the self-tapping screws through the holes in the top and the base of the hinge plate into the tub. Tighten to
3Nm.
Measure distance
from centre on both
sides and mark.
3
6 0 mm
3
6 0 mm
The front of your tub will have a bead of seam seal on, please trim if the hinge does not sit flat.
1177
19
MX40P Page 5 of 16