Quick Guide for HSP MicroModem 56K
7
5. Click Next.
6. Click the Finish button.
7. When the "HSP Modem Country Selection" window is displayed, select your country
and click OK.
Note
To install the modem driver by using the Installation Program of the
Restore CD, you must reboot the computer after the files are copied. When
your system is rebooting, remove the Restore CD from the CD-ROM drive.
If you don't remove the Restore CD, your system will be booted with the
Restore CD. In this case, the "Microsoft Windows 98 Startup Menu" menu
will appear. To continue the installation of the modem driver, remove the
Restore CD and turn off and on the computer.
Troubleshooting
If you have trouble with your modem, check the following instructions:
• Check the provided RJ11 jack cable is properly plugged into line jack on the modem
and check phone line from telephone is properly plugged into the phone jack on the
modem.
• The modem should be connected to an analog line only. If you use a non-analog
phone line such as a digital line, the modem will be damaged.
• If you see the "Error 680: There is no dial tone" message, configure your modem
as described in "Accessing an Outside Line (Configuring the Modem to dial with
PBX System)."
• Line noise may cause low connection speeds. If the problem persists, contact your
telephone company to check for data noise and unbalanced lines.
