Quick Guide for HSP MicroModem 56K
4
Changing the COM Port
Follow the next steps to change the modem to a desired COM port:
1. Click the Start button, point to Settings and click Control Panel.
2. Double-click the HSP Modem icon. The HSP Modem window will be displayed.
3. Select the desired COM port and click the Apply button.
4. From here on, if a communication program asks for the COM port for the modem,
specify this COM port setting.
Changing the IRQ Setting
You can not change the IRQ for your modem, as it is the PnP modem.
Accessing an Outside Line
(Configuring the Modem to dial with PBX System)
Make sure you are not connecting the modem to a Digital Line from your PBX.
Check that you added the correct code to dial out (eg., "9,").
If the "Error 680: There is no dial tone" message appears, follow the next steps:
1. Click the Start button, point to Settings, and click Control Panel.
2. Double-click the Modems icon.
3. Click the Properties button on the Modem Properties window.
