- Read through the fitting instructions before installation of accessory.
- Always install the Hard Lid Light Wiring Kit following the workshop manual and
instructions provided. Failure to
do so may cause damage to the vehicle or the accessory.
- Ensure all recyclable components and packaging are discarded and recycled following local recycling
regulations.
- It is always recommended that the
is fitted by a qualified automotive technician.
- Safely store and protect any removed vehicle components.
fitting
Hard Lid Light Wiring Kit
- Check that all work practices comply with safety standards.
- Please wear appropriate clothing and use safety equipment.
30 minutes
General Notes
Safety Notes
Fitting Time
Page 02 of
Parts Supplied
Tools and Materials Required
H
G
Phillips Head Screwdriver
Spanner Set
Ratchet & Socket Set
Drill
Drill Bit
Stepped Drill Bit
Ø14mm
Tape
Scissors
Side Cutters
10mm Spanner
Socket Set
Ø4.5mm
Foam Tape
100 x 40 x 3mm x2
Template
(Pages 9) x2
C
LED Lamp x1
D
Push Button Switch x1
or
A
Light Wiring
Harness x1
B
Battery Power
Harness x1
E
Cable Tie Mount x1
F
Cable Tie x1
G
Fitting Instructions x1
FI Doc No: FI11793 - Issue: 2 - 12/04/17
HSP UTE LIDS
05
© Lumen Australia 2017