05/2016
SECURIO B 24
11
english
3 Overview
2 Proper use, warranty
Its sturdy drive mechanism is not damaged
by paper clips and staples. Only on ma-
chines with a cutting width of 1 x 5 mm can
the paper not contain staples or paper clips.
The warranty period for the document
shredder is 3 years. There is a special war-
ranty for the HSM solid steel cutting roll-
ers in the document shredder, which is
provided independently of the guarantee,
and remains valid for the entire service life
of the machine (HSM Lifetime Warranty).
This does not apply to document shredders
with cutting widths of 0.78 x 11 mm and
1 x 5 mm. This warranty and guarantee ex-
clude wear and damage caused by improp-
er handling or actions taken by third parties.
HSM guarantees the delivery of spare parts
for up to 10 years after the production of
this model has been discontinued.
Remove the shredded material container
and check the name plate on the cutting
head (see point 3 Overview) to
fi
nd out
which cutting width and mains voltage your
document shredder is designed for. Refer to
the relevant point in the operating manual.
The shredder is designed for destroying
paper. Depending on the cutting type, it can
also handle small quantities of the following
materials:
Shred width (mm)
5.8 3.9 4.5x30 1.9x15
Credit and charge cards
●
●
●
●
CDs
●
●
●
Note:
Document shredders with a particle cutting
unit also come with an optional device for
lubricating the cutting unit. Note the docu-
mentation enclosed for the oiler if your ma-
chine is equipped with one.
Operating and display elements
Reverse button
Display options:
Container full
Cutting unit blocked
Container open
Ready for operation
Operation button
7
2
5
4
1
8
3
6
1 Safety
instructions
2 Feed opening for CDs
3 Safety element / splinter protection
4 Operating and display unit
5 Name
plate
6 Shredded material container
7 Feed opening for paper and credit cards
8 Light
barrier
