HSM HSM 411.2, Operating Instructions Manual

Page: 23 / 122

Paper shredder HSM 411.2
01/02 23
GB
10. Malfunctions
If the paper shredder does not work properly, please check the following points before
contacting our customer service:
• Is mains plug inserted?
➪
Insert mains plug
• Is paper shredder switched on?
➪
Switch shredder on
• Are the paper shredder door and
inspection door closed?
➪
Close door and inspection door
• Is shredded material bag full?
➪
Empty bag
• Is there a paper jam in the paper shredder?
➪
Clear paper jam
• Is the motor overloaded?
➪
Allow motor to cool down for
approx. 15–20 min.
Paper jam (too much paper input)
Paper shredder jammed
• Red LED on membrane keyboard lights
• Paper shredder reverses automatically
Pull paper out of the paper feeding opening
If material is not completely pushed out, then
Press dashed arrow button
• Paper is pushed out
Pull paper out
The cutting device is easily accessible once the inspection door on the top
of the machine is opened.
CAUTION!
Injuries by cutting rollers are possible even when the paper shredder is idle.
Keep hands away from the cutting system when running!
Separate paper stack and feed paper again
• The shredding process is started by a photo–cell in the paper feeding
opening
CAUTION !
Do not press dashed arrow button and green arrow button alternately
forwards and backwards
Cutting system can be damaged