- 11 -
2.6
Electrical safety
a)
Avoid physical contact with grounded surfaces such as pipes, radiators, etc
.
There
is an increased risk due to electrical shock, if your body is grounded.
b) Keep the device away from rain or moisture.
Water penetrating into charging station
increases the risk of an electrical shock.
c) Keep the charging station away from heat, oil, sharp edges or moving device parts.
2.7
Service
NOTE
Only allow your charging station to be repaired by a qualified technician
using only original replacement parts, available from HS-Technik GmbH. This
ensures that the safety of your device is maintained.
2.8
Lithium-ion battery
NOTE
Please make sure to follow the following instructions for using lithium-ion
batteries!
a) Only charge the batteries in suitable chargers
if the battery is not used in a suitable
charger, it may be permanently damaged.
b)
If the battery is not used for a longer period of time, it must not remain on the
charger or on the tool.
If a work break of more than 3 hours is expected, the battery
must be removed from the tool. Otherwise, the battery may be permanently damaged.
c) The lithium-ion battery should not remain on the charger for longer than 36 hours
for safety reasons.
Remove the battery from the charger immediately after the
charging process is completed.
d) An empty battery should not be in contact with the tool or a charger that is
disconnected from the mains
for a longer period of time
. In both cases, currents
can flow that deep discharge the battery and can permanently damage it.
Summary of Contents for HST-MV3-02
Page 31: ...Notes ...
